|
STARGLOW
UV NEON
PAINTS
Daytime Visible
UV-NEON
Paint
 |
|
Move pointer over this picture to see NEON Glow |
|
Click here
to Buy Now |
 |
Click on
a bottle below for more information
|
 |
Manufactured using our range of next-generation STARGLOW
UV Neon powders. STARGLOW
Paints are safe water-based acrylic coatings that are coloured daylight, and
(depending on the colour) will glow vividly when exposed to UV Blacklight.
|
|
STARGLOW paints may be used on a wide range of surfaces providing they are pre-painted or primed
(if required) and clean and free from dirt oil and grease.
|
STARGLOW PAINTS
can be applied by Brush,
Roller or Spray.
|
● |
Quick-Drying & Solvent
Free |
|
● |
Daytime Coloured - UV
Sensitive |
|
● |
Suitable for Inside &
Outside use |
|
● |
Brushes Wash-out in
Water |
|
● |
ECO-Safe / Low VOCs |
|
● |
Made in the UK |
Suitable for use on most surfaces....
-
Wood
-
Metal
-
Plastic
-
Paper/Card
-
Most Fabrics
-
Masonry
|
 |
|
Click here
to Buy Now |
|
Move
mouse pointer over the picture to see UV NEON Colours
(Colours
on screen do not look as bright and vivid as they are in real life)
Basic guidelines for using
STARGLOW
UV NEON Paint.
|
• |
As UV pigments will
tend to settle after a while you should stir the paint well before each
use. |
|
• |
Use a white, or a light
colour as the background for the best results. Any colour other than
white may diminish the UV glow.
|
|
• |
Try to build-up thin
layers of paint to create one thick layer. Generally speaking, The
thicker the layer of paint, the more consistent the glow effect. |
|
• |
Leave each layer 60 minutes to dry before a re-coating. |
|
• |
Do not over-dilute or 'thin'
the glow-paint too much as this will impair its performance.
|
|
• |
If you are using outdoors
you do not need to protect your coating, However if it will be
exposed to hand or foot contact, you should apply one or two
coats of STARGLOW top-coat sealer. |
|
• |
For best UV Glow performance, UV Neon Paints should be applied to a white / light surface
and a strong UV Blacklight be used at close proximity. |
These are just
guidelines. The user should use their best judgement in working with the
paints.
Coverage
A 30ml pot of
Starglow Paint will cover an area approximately the size of an
A4 piece of paper.
A 60ml pot of
Starglow Paint will cover an area approximately the size of an
A3 piece of paper.
A 120ml pot
of Starglow Paint will cover an area approximately the size of an
A2 piece of paper.
A 240ml pot
of Starglow Paint will cover an area approximately 1
Square meter
For larger quantities
A 500ml pot
of Starglow Paint will cover an area approximately
2 - 3 Square meters
A 1lt
pot of Starglow Paint
will cover an area approximately 4 - 6 Square meters
First Aid
May cause irritation of nose,
throat, eyes & skin. Wash with soap and water when your skin or eyes are
exposed to our products. Keep the products away from moisture and seal it
when not in use. If swallowed do not induce vomiting. Seek medical
attention.
Important Note
Before adopting commercially, prospective
users of our products are advised to firstly purchase a sample in order to
fully evaluate the product’s suitability for purpose.
Children should be
supervised when using this product.
|
